Introduction

This guide will illustrate how to remove the heat sink from your PowerMac.

Pièces

Aucune pièce nécessaire.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Ajouter un commentaire

Use the spudger to pry the clips horizontally off of the heat sink. Fully remove the clips by lifting upwards.
  • Use the spudger to pry the clips horizontally off of the heat sink.

  • Fully remove the clips by lifting upwards.

Ajouter un commentaire

Remove the heat sink by pulling upwards, off of the logic board.
  • Remove the heat sink by pulling upwards, off of the logic board.

Ajouter un commentaire

Ligne d'arrivée

6 autre(s) ont terminé cette réparation.

Justin Petrilli

Membre depuis le 21/01/2010

2 598 Réputation

11 tutoriels rédigés

Équipe

Cal Poly, Team 13-24, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 membres

13 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 5,076