Aller au contenu principal

PowerBook G4 Titanium Onyx Airport Card Replacement

Ce dont vous avez besoin

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  1. PowerBook G4 Titanium Onyx Airport Card Replacement: étape 2, image 1 de 1
    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  2. PowerBook G4 Titanium Onyx Airport Card Replacement: étape 3, image 1 de 1
    • Your laptop should look approximately like this.

  3. PowerBook G4 Titanium Onyx Airport Card Replacement, Airport Card: étape 4, image 1 de 1
    • Skip this step if your computer does not have an Airport card.

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Pièces jointes

iRobot

Membre depuis le 09/24/09

1 Réputation

636 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 10

Total : 9,608