Introduction

This guide will help you replace the top outer casing of the mouse that holds some of the electronics for the LED lighting. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.

Pièces

Aucune pièce nécessaire.

Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
  • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

Ajouter un commentaire

Remove the four 7mm screws using a Phillips head #00 screwdriver.
  • Remove the four 7mm screws using a Phillips head #00 screwdriver.

Ajouter un commentaire

Gently remove the top plastic plate of the mouse.
  • Gently remove the top plastic plate of the mouse.

  • Unplug the white cord from the circuit board.

Ajouter un commentaire

Lightly pull the two plastic sides of the mouse to remove them.
  • Lightly pull the two plastic sides of the mouse to remove them.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Gianni Conti

Membre depuis le 29/01/2018

311 Réputation

2 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 6

30 derniers jours : 24

Total : 72