Introduction

This guide will systematically explain how to replace the shaving blade of the Remington MB4040. A rough or irritating shave is most likely caused by a dull blade. The replacement of this dull blade will allow for a more comfortable shave.

Pièces

Aucune pièce nécessaire.

Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position. Press the black button to release the blade from its locked position.
  • Press the black button to release the blade from its locked position.

Ajouter un commentaire

Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly. Detach the silver blade from the blade assembly and replace with the new blade. Detach the silver blade from the blade assembly and replace with the new blade.
  • Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.

  • Detach the silver blade from the blade assembly and replace with the new blade.

The entre assemble comes apart once you remove the blade. I cannot figure out how to get it back together and in the housing. Any suggestions?

sublime - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cameron Carnahan

Membre depuis le 20/01/2015

685 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 1-5, Blackwell Winter 2015 Membre de l'équipe USF Tampa, Team 1-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S1G5

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 25

30 derniers jours : 112

Total : 3,883