Pièces

Aucune pièce nécessaire.

Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
  • Remove the screws from the bottom, right, and left side of camera.

Ajouter un commentaire

Remove the back of the camera, may require force.
  • Remove the back of the camera, may require force.

Ajouter un commentaire

Unscrew the right metal bracket of the viewing lens
  • Unscrew the right metal bracket of the viewing lens

Ajouter un commentaire

Unscrew the top right corner screw
  • Unscrew the top right corner screw

Ajouter un commentaire

Unscrew the bottom right corner screw.
  • Unscrew the bottom right corner screw.

Ajouter un commentaire

Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
  • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

Ajouter un commentaire

Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
  • Pull the front of the camera off of the mother board.

Ajouter un commentaire

Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.
  • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

Ajouter un commentaire

Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.
  • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

Ajouter un commentaire

Pull out the red wire and white wire attaching the screen to the motherboard.
  • Pull out the red wire and white wire attaching the screen to the motherboard.

Ajouter un commentaire

Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.
  • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Melissa

Membre depuis le 12/02/2013

240 Réputation

2 tutoriels rédigés

Équipe

Ohio State, Team 1-2, Buehl Spring 2013 Membre de l'équipe Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 131