Introduction

This guide will help you repair the buttons on the Seville Classics MSC10166 Tower Fan.

Pièces

Aucune pièce nécessaire.

Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.
  • Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.

  • Do this by unscrewing from left-to-right then pull the screws out of the back of the fan

Ajouter un commentaire

Pull the front and back cover apart.
  • Pull the front and back cover apart.

  • Be careful not to pull the front cover off completely because it holds the wires.

Ajouter un commentaire

Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.
  • Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.

  • Make sure the fan is unplugged while removing the circuit board as you may get shocked.

  • To remove the screws, unscrew in a left-to-right fashion at an angle to make sure that the wires do not get tangled.

Ajouter un commentaire

Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.
  • Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.

Ajouter un commentaire

Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you  may damage circuit elements. Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.
  • Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements.

  • Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.

Ajouter un commentaire

Next remove the two (7-mm head) 8-mm screws that attach the buttons to the top cover of the fan.
  • Next remove the two (7-mm head) 8-mm screws that attach the buttons to the top cover of the fan.

  • To do this, unscrew in an upright position and pull screw out after.

Ajouter un commentaire

Remove the buttons from the top cover.
  • Remove the buttons from the top cover.

Ajouter un commentaire

Wipe down any dirt on the buttons.
  • Wipe down any dirt on the buttons.

Ajouter un commentaire

Wipe down the frame that holds the buttons.
  • Wipe down the frame that holds the buttons.

  • Reverse the order of this guide in order to put back together the fan.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Queena Phung

Membre depuis le 26/09/2012

96 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 15-46, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 16

30 derniers jours : 50

Total : 1,459