Réparez vos affaires Communauté Boutique

Resetting PlayStation 3 Drive Mechanism

Tutoriel Archivé
Ce tutoriel est conservé uniquement à des fins de suivis historiques. Utilisez la version actuelle du tutoriel pour effectuer votre réparation.

Ce dont vous avez besoin

  1. Resetting PlayStation 3 Drive Mechanism, Resetting PlayStation 3 Drive Mechanism: étape 1, image 1 de 1

    • Remove Rubber Foot

    Modifier

  2. Resetting PlayStation 3 Drive Mechanism: étape 2, image 1 de 1

    • Remove Screw with a TORX Security T10 Bit (or you can use a small flat head screwdriver)

    Modifier

  3. Resetting PlayStation 3 Drive Mechanism: étape 3, image 1 de 1

    • Carefully slide the top plate and lift to remove

    Modifier

  4. Resetting PlayStation 3 Drive Mechanism: étape 4, image 1 de 1

    • Remove the main screws (philips head)

    Modifier

  6. Resetting PlayStation 3 Drive Mechanism: étape 5, image 1 de 1

    • Lift The Top Casing Towards the front of the PS3 carefully

    Modifier

  7. Resetting PlayStation 3 Drive Mechanism: étape 6, image 1 de 1

    • Carefully Remove Power cable from the motherboard

    Modifier

  8. Resetting PlayStation 3 Drive Mechanism: étape 7, image 1 de 1

    • Lift the Disk drive to the right and remove the largest ribbon cable by lifting the black catch and remove the drive from the PS3

    Modifier

  9. Resetting PlayStation 3 Drive Mechanism: étape 8, image 1 de 1

    • Remove Screws 11, 12 and 13 only

    Modifier

  10. Resetting PlayStation 3 Drive Mechanism: étape 9, image 1 de 1

    • Remove screws 14 and 15 and the silver springboard, slightly bend top metal away from disk entry area,and pull back to remove the metal jacket.

    Modifier

  11. Resetting PlayStation 3 Drive Mechanism: étape 10, image 1 de 1

    • Remove white center hub piece (D) and screws 16 - 20 then fold the top section to the left being careful not to damage the cable to the bottom left. The cable is very delicate and easily damaged.

    Modifier

  12. Resetting PlayStation 3 Drive Mechanism: étape 11, image 1 de 1

    • Remove the screw circled in red and lift up the black assembly to reveal the mechanism beneath. Set it aside right-side up and be careful not to shake any parts loose.

    Modifier

  13. Resetting PlayStation 3 Drive Mechanism: étape 12, image 1 de 1

    • Remove two screws in blue and lift the motor up and to right to disengage the cogs but be careful not to stress the attached wires.

    • Move the disc handling element on the left side up so that its teeth are clear of the black cog.

    • Reset insertion trap lock mechanism and make sure the white tab on right is lowered (nudge it left to make it drop).

    • Replace the motor and reverse this guide to reassemble.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

15 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

David Harris

Membre depuis le 09/15/12

816 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 15,927