Introduction

In this guide, you will learn how to take apart the Ring Video Doorbell Pro.

Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.
  • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

Ajouter un commentaire

Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device. Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device. Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.
  • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.
  • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

Ajouter un commentaire

Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device. Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.
  • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

Ajouter un commentaire

Remove the front of the device from the back plate.
  • Remove the front of the device from the back plate.

Ajouter un commentaire

Conclusion

To reassemble your device, attach the new housing and follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jake Dixon

Membre depuis le 09/11/2017

551 Réputation

4 tutoriels rédigés

Équipe

IUPUI, Team S7-G4, Baechle Fall 2017 Membre de l'équipe IUPUI, Team S7-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G4

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 4

7 derniers jours : 20

30 derniers jours : 100

Total : 465