Introduction

If the main display on your phone is cracked, depicting a frozen image, or not displaying an image at all, then installing a new display may fix these problems.

Pièces

Aucune pièce nécessaire.

To remove the back casing, firmly press down and push towards the bottom of the phone. To remove the back casing, firmly press down and push towards the bottom of the phone. To remove the back casing, firmly press down and push towards the bottom of the phone.
  • To remove the back casing, firmly press down and push towards the bottom of the phone.

Ajouter un commentaire

With the casing removed, lift the battery from the indicated indentation.
  • With the casing removed, lift the battery from the indicated indentation.

Ajouter un commentaire

From here, you can now access the SIM card and model/serial numbers.
  • From here, you can now access the SIM card and model/serial numbers.

Ajouter un commentaire

Using the Phillips #00 screwdriver, remove the four indicated screws (4.5 mm).
  • Using the Phillips #00 screwdriver, remove the four indicated screws (4.5 mm).

Ajouter un commentaire

Press the pointed edge of the spudger into the side of the two rubber plugs in order to lift and remove them from the top of the phone. Then, using the Phillips #00 screwdriver, remove the two indicated Phillip screws (6.5 mm).
  • Press the pointed edge of the spudger into the side of the two rubber plugs in order to lift and remove them from the top of the phone.

  • Then, using the Phillips #00 screwdriver, remove the two indicated Phillip screws (6.5 mm).

Ajouter un commentaire

To remove the SIM card, start by pressing the top of the card and push down and away towards the bottom of the phone. Then, as indicated, pull the SIM card out.
  • To remove the SIM card, start by pressing the top of the card and push down and away towards the bottom of the phone. Then, as indicated, pull the SIM card out.

Ajouter un commentaire

Begin to slowly lift the back casing of the phone. You should hear a snap when the casing is released. The power, volume, and camera buttons may fall out when separating the front and back casing.
  • Begin to slowly lift the back casing of the phone. You should hear a snap when the casing is released.

  • The power, volume, and camera buttons may fall out when separating the front and back casing.

Ajouter un commentaire

Your casing should be separated and the three loose buttons put to the side.
  • Your casing should be separated and the three loose buttons put to the side.

  • Be aware of the wiring on the top of the phone. Make sure not to pull it apart when separating the case.

Ajouter un commentaire

Slowly remove the back casing by gently pulling the ribbon connection. Slowly remove the back casing by gently pulling the ribbon connection.
  • Slowly remove the back casing by gently pulling the ribbon connection.

Ajouter un commentaire

Gently pull on the wires to remove the front casing. Gently pull on the wires to remove the front casing.
  • Gently pull on the wires to remove the front casing.

Ajouter un commentaire

Your front casing and front speaker are now released.
  • Your front casing and front speaker are now released.

Ajouter un commentaire

Locate the display screen. Carefully squeeze part of the flat or pointed edge of the spudger into the spacing under the glass display to pry and lift the display up.
  • Locate the display screen.

  • Carefully squeeze part of the flat or pointed edge of the spudger into the spacing under the glass display to pry and lift the display up.

  • It may help to insert the pointed edge of the spudger into the small indentation shown on the right in the second image.

Ajouter un commentaire

Slide the spudger across the bottom of the display and slowly push up. Slide the spudger across the bottom of the display and slowly push up. Slide the spudger across the bottom of the display and slowly push up.
  • Slide the spudger across the bottom of the display and slowly push up.

Ajouter un commentaire

Slowly pry the spudger up to remove the display.
  • Slowly pry the spudger up to remove the display.

Ajouter un commentaire

To remove the casing as a whole, slowly lift up and towards the right side of the phone.
  • To remove the casing as a whole, slowly lift up and towards the right side of the phone.

  • Be aware of the wiring on the right side of the phone connecting the display.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Breanne

Membre depuis le 12/04/2012

187 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 6-24, Amido Spring 2012 Membre de l'équipe Cal Poly, Team 6-24, Amido Spring 2012

CPSU-AMIDO-S12S6G24

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,322