Introduction

Follow these easy steps to replace the imaging unit in your Samsung CLP-300.

Turn the printer off and wait a few minutes for it to cool.
  • Turn the printer off and wait a few minutes for it to cool.

Ajouter un commentaire

Open the front cover Open the front cover
  • Open the front cover

Ajouter un commentaire

Remove waste toner container from the printer.
  • Remove waste toner container from the printer.

Ajouter un commentaire

Pull the imaging unit out of the printer using bottom handle. Use green handle on top of imaging unit to steady unit as you pull it out. Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
  • Pull the imaging unit out of the printer using bottom handle.

  • Use green handle on top of imaging unit to steady unit as you pull it out.

  • Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”

  • Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit

  • Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.

  • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Heather Howard

Membre depuis le 15/10/2014

439 Réputation

4 tutoriels rédigés

Équipe

University of Maine, Team 1-1, Diaz Fall 2014 Membre de l'équipe University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 12

7 derniers jours : 68

30 derniers jours : 266

Total : 3,689