Introduction

Follow these easy steps to replace your old waste toner container. When waste toner container needs to be replaced a smart panel program window should appear on your computer.

Turn the printer off and wait a few minutes for it to cool.
  • Turn the printer off and wait a few minutes for it to cool.

Ajouter un commentaire

Open the front cover. Open the front cover.
  • Open the front cover.

Ajouter un commentaire

Pull the waste toner container out of the printer using the handle.
  • Pull the waste toner container out of the printer using the handle.

  • Make sure to keep waste toner container upright to avoid spillage.

Ajouter un commentaire

Use the provided green cap to close the waste container opening on the top back of the container.
  • Use the provided green cap to close the waste container opening on the top back of the container.

  • Push new container firmly into place.

  • Firmly close front cover.

  • Turn printer on.

  • It may take up to 3 minutes for printer to resume function.

  • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Heather Howard

Membre depuis le 15/10/2014

439 Réputation

4 tutoriels rédigés

Équipe

University of Maine, Team 1-1, Diaz Fall 2014 Membre de l'équipe University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 42

30 derniers jours : 156

Total : 3,200