Introduction

Use this guide to replace the microSD card.

Pièces

Aucune pièce nécessaire.

Insert a plastic opening tool, or your fingernail, into the opening near the left side of the headphone jack. Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.
  • Insert a plastic opening tool, or your fingernail, into the opening near the left side of the headphone jack.

  • Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.

Ajouter un commentaire

Lift and remove the rear case. Lift and remove the rear case.
  • Lift and remove the rear case.

Ajouter un commentaire

Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click. After the click, release the card and it will pop out of its slot.
  • Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.

  • After the click, release the card and it will pop out of its slot.

  • During reassembly, push the microSD card into the slot until it clicks in place.

Ajouter un commentaire

Pull the microSD card away from its slot.
  • Pull the microSD card away from its slot.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Uhh.... my Australian SGSII looks different to this...

Bonj - Réponse

If you are having trouble addint a 64gb micro sd card, it's because you have to first format that card to FAT32. You have to do that to the memory card through a computer. Youtube too, it'll help

asff - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 4,090