Réparez vos affaires Communauté Boutique

Samsung Galaxy J3 Eclipse Home Button Replacement

Ce dont vous avez besoin

  1. Samsung Galaxy J3 Eclipse Home Button Replacement, Display Assembly: étape 1, image 1 de 1

    • Use a heat gun or hair dryer to heat up the front edges of the phone for about two minutes. Stay approximately six inches away from the screen to prevent phone damage.

    • Do not apply heat to any one edge of the phone for longer than a few seconds. Instead, use a continuous motion around the phone's edges.

    Traduire

  2. Samsung Galaxy J3 Eclipse Home Button Replacement: étape 2, image 1 de 2 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 2, image 2 de 2
    Outil utilisé dans cette étape :
    Plastic Cards
    $2.99
    J'achète

    • While the screen adhesive is still warm and flexible, insert a pry tool or plastic card between the glass display and the frame of the phone.

    • Slowly slide another pry tool around all the edges of the phone in order to break the adhesive's bond to the display.

    • When using the pry tool, do not use too much force or the phone's internals could be damaged.

    • Do not insert your tool more than 1cm into the top edge of the phone to avoid damaging the fragile cables.

    Traduire

  4. Samsung Galaxy J3 Eclipse Home Button Replacement: étape 3, image 1 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 3, image 2 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 3, image 3 de 3

    • Gently lift lower side and loosen all edges to hinge screen up from bottom.

    • Do not try to completely remove the display from the frame yet. Simply try to loosen up all the edges.

    Traduire

  5. Samsung Galaxy J3 Eclipse Home Button Replacement: étape 4, image 1 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 4, image 2 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 4, image 3 de 3

    • Use your prying tool to slowly pry up on the bottom right corner of the white cable guard, exposing a thin ribbon cable connector.

    Traduire

  6. Samsung Galaxy J3 Eclipse Home Button Replacement: étape 5, image 1 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 5, image 2 de 3 Samsung Galaxy J3 Eclipse Home Button Replacement: étape 5, image 3 de 3

    • Pry up the ribbon cable connector revealed from under the cable guard and remove the display from the device.

    • Clean the residue from the phone edges before re-assembling phone with new screen.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Chandler Casey

Membre depuis le 09/21/18

792 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

University of North Texas, Team S2-G4, Riccardelli Fall 2018 Membre de l'équipe University of North Texas, Team S2-G4, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S2G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 328