Introduction

Installing the front cover of the phone.

Pièces

Aucune pièce nécessaire.

Use a Philips #0 screwdriver to remove the two screws below the screen.
  • Use a Philips #0 screwdriver to remove the two screws below the screen.

Ajouter un commentaire

Using the spudger, separate the black speaker cover from the top part of the phone. Gently remove the black speaker cover completely. Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.
  • Using the spudger, separate the black speaker cover from the top part of the phone.

  • Gently remove the black speaker cover completely.

  • Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.

Ajouter un commentaire

Once the two screws are taken out, use the spudger to remove the front cover of the phone. Once the two screws are taken out, use the spudger to remove the front cover of the phone.
  • Once the two screws are taken out, use the spudger to remove the front cover of the phone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley

Membre depuis le 22/10/2012

19 Réputation

2 tutoriels rédigés

Équipe

Clemson, Team 14-6, Benson Fall 2012 Membre de l'équipe Clemson, Team 14-6, Benson Fall 2012

CLEM-BENSON-F12S14G6

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 203