Introduction

The guide will instruct how to change the phone camera without prior experience.

Place the phone on a flat surface with the camera on the top facing you.
  • Place the phone on a flat surface with the camera on the top facing you.

  • Have an organized space for each small part.

Ajouter un commentaire

Open the phone.
  • Open the phone.

  • Locate two small rubber circles found below the viewing screen. These are soft screw covers.

  • Use tweezers or pick to remove soft screw covers.

Ajouter un commentaire

Loosen the screws under soft covers on both sides using a Philips screwdriver.
  • Loosen the screws under soft covers on both sides using a Philips screwdriver.

Ajouter un commentaire

Failure to Utilize the Specified Tool May Cause Damage to the Device Locate black cover plate on the back side of the viewing screen; it contains the AT&T logo and the word Samsung. Viewing phone from the side, look for the crease in between the black cover and silver part of phone.
  • Failure to Utilize the Specified Tool May Cause Damage to the Device

  • Locate black cover plate on the back side of the viewing screen; it contains the AT&T logo and the word Samsung.

  • Viewing phone from the side, look for the crease in between the black cover and silver part of phone.

  • Use a prying device to pry off the cover plate.

Ajouter un commentaire

Failure to Utilize the Specified Tool May Cause Damage to the Device Identify the metal bracket covering the internal body.
  • Failure to Utilize the Specified Tool May Cause Damage to the Device

  • Identify the metal bracket covering the internal body.

  • Identify the metal tabs around the bracket.

  • Get a small pick or regular screwdriver.

  • Remove metal cover bracket using the small pick or regular screwdriver.

  • Close the phone.

Ajouter un commentaire

Find the camera on upper part of phone. (small black circle).
  • Find the camera on upper part of phone. (small black circle).

  • Follow the ribbon connected to the camera downward to the black connection port.

Ajouter un commentaire

Failure to Utilize the Specified Tool in the Proper Way May Cause Damage to the Device Use pick to pry up the black connector.
  • Failure to Utilize the Specified Tool in the Proper Way May Cause Damage to the Device

  • Use pick to pry up the black connector.

  • The black connector should lock into place remaining in an upward position.

    • The ribbon connected to the phone's camera will be released.

Ajouter un commentaire

Use tweezers to gently grasp the ribbon attached to the camera. Gently pull ribbon toward the camera.
  • Use tweezers to gently grasp the ribbon attached to the camera.

  • Gently pull ribbon toward the camera.

    • The ribbon should come completely out.

Ajouter un commentaire

Remove the camera.
  • Remove the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathon

Membre depuis le 15/10/2014

4 Réputation

1 tutoriel rédigé

Équipe

Ohio State, Team 1-4, Mccook Fall 2014 Membre de l'équipe Ohio State, Team 1-4, Mccook Fall 2014

OSU-MCCOOK-F14S1G4

3 membres

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 151