Introduction

This is a step by step guide on how to replace the Samsung SPH-A500 logic board.

Pièces

Aucune pièce nécessaire.

Turn phone over
  • Turn phone over

  • Push the gray tab above the battery forward to remove the battery.

Ajouter un commentaire

Remove the battery from the phone, which will reveal four screws at the corners of the phone.
  • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

Ajouter un commentaire

Remove all four screws using a small Philips screwdriver.
  • Remove all four screws using a small Philips screwdriver.

  • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

Ajouter un commentaire

Remove back cover by carefully prying it open.
  • Remove back cover by carefully prying it open.

  • Note: Some force may be required.

Ajouter un commentaire

Pull the side tabs outward while simultaneously lifting up the circuit board.
  • Pull the side tabs outward while simultaneously lifting up the circuit board.

  • Do not completely pull out the circuit board.

Ajouter un commentaire

Look for the clip at the top right corner of the logic board.
  • Look for the clip at the top right corner of the logic board.

Ajouter un commentaire

Remove the clip from the logic board.
  • Remove the clip from the logic board.

Ajouter un commentaire

Remove the logic board.
  • Remove the logic board.

  • Replace the broken logic board with a new one.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Nick Dominikovic

Membre depuis le 13/04/2010

139 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 18-100, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,874