Introduction

If you are encountering issues such as unreadable memory card followed by a notification like “this card cannot be used” or card running slower than anticipated, these issues may constitute replacing the card.

Pièces

Aucune pièce nécessaire.

Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
  • Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.

  • Screws securing the back panel underneath the adhesive will be exposed.

  • Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device.

Ajouter un commentaire

Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.
  • Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.

  • Keep track of the screws and their placement on the laptop. This will help make reassembly easier and more organized.

Ajouter un commentaire

Find an opening on the back of the laptop.  Use the plastic prying tool to help pry open the back panel of the laptop. Use both hands when removing the back case cover. Too much force will bend the cover making it difficult to reassemble. Use both hands when removing the back case cover. Too much force will bend the cover making it difficult to reassemble.
  • Find an opening on the back of the laptop. Use the plastic prying tool to help pry open the back panel of the laptop.

  • Use both hands when removing the back case cover. Too much force will bend the cover making it difficult to reassemble.

Ajouter un commentaire

Locate the AUX and USB port on the left side of the laptop.
  • Locate the AUX and USB port on the left side of the laptop.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the one 0.1mm screw using a Phillips #0 Screwdriver from the laptop.
  • Remove the one 0.1mm screw using a Phillips #0 Screwdriver from the laptop.

  • Keep track of the 0.1mm screws for reassembly later.

Ajouter un commentaire

Use a plastic prying tool to remove the top connector of the port from the motherboard.
  • Use a plastic prying tool to remove the top connector of the port from the motherboard.

  • This should come out very easily and allow access to the Memory card.

Ajouter un commentaire

Remove the second connector from the motherboard using the prying tool.
  • Remove the second connector from the motherboard using the prying tool.

  • This should come out very easily, and allow access to the Memory card.

Ajouter un commentaire

Find an opening on the side of the port and pry the USB and AUX port out of the laptop with the prying tool. Find an opening on the side of the port and pry the USB and AUX port out of the laptop with the prying tool.
  • Find an opening on the side of the port and pry the USB and AUX port out of the laptop with the prying tool.

Ajouter un commentaire

Remove and place the port outside of the laptop. You are free to install your new USB and HDMI ports.
  • Remove and place the port outside of the laptop. You are free to install your new USB and HDMI ports.

Ajouter un commentaire

Using your Phillips #0 Screwdriver, unscrew the 0.1mm screws securing the memory card in place at the top.
  • Using your Phillips #0 Screwdriver, unscrew the 0.1mm screws securing the memory card in place at the top.

  • Remember to keep track of the screws for reassembly.

Ajouter un commentaire

After removing the screws, your card should angle upward making for an easier removal. Using both hands, gently lift the card out of its socket in the direction away from yourself. Use caution when removing the card, bending the pins will damage the socket and your ability to reuse the memory card if you plan to.
  • After removing the screws, your card should angle upward making for an easier removal.

  • Using both hands, gently lift the card out of its socket in the direction away from yourself.

  • Use caution when removing the card, bending the pins will damage the socket and your ability to reuse the memory card if you plan to.

Ajouter un commentaire

Replace the the card with a new compatible memory card.
  • Replace the the card with a new compatible memory card.

  • To install your new memory card, follow these steps in reverse order.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austin Gross

Membre depuis le 08/02/2018

147 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 17

Total : 30