Introduction

This guide will show you how to replace the brushroll on your Shark Rocket Powerhead AH401 if it is damaged, needs cleaning, or you are trying to change the type of brushroll. Be careful of any hazardous materials your brushroll could have picked up before grabbing it.

Ensure the device is turned off and unplugged from any power source before beginning work. Locate the two tabs with white arrows on them. They are located on either side of the brushroll cover. Slide the tabs away from the center of the vacuum to unlock the brushroll cover.
  • Ensure the device is turned off and unplugged from any power source before beginning work.

  • Locate the two tabs with white arrows on them. They are located on either side of the brushroll cover.

  • Slide the tabs away from the center of the vacuum to unlock the brushroll cover.

  • Lift the brushroll cover upward.

Ajouter un commentaire

Lift the brushroll out by pulling the tab labeled "pull". Lift the brushroll out by pulling the tab labeled "pull".
  • Lift the brushroll out by pulling the tab labeled "pull".

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Toan Pham

Membre depuis le 24/01/2018

242 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team S19-G3, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S19-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G3

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 45