Aller au contenu principal

Snowboard Binding Replacement

Ce dont vous avez besoin

  1. Snowboard Binding Replacement, Binding: étape 1, image 1 de 3 Snowboard Binding Replacement, Binding: étape 1, image 2 de 3 Snowboard Binding Replacement, Binding: étape 1, image 3 de 3
    • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

    • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

  2. Snowboard Binding Replacement: étape 2, image 1 de 2 Snowboard Binding Replacement: étape 2, image 2 de 2
    • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

    • The highback plate is the vertical support plate located on the heel side of the binding.

  3. Snowboard Binding Replacement: étape 3, image 1 de 2 Snowboard Binding Replacement: étape 3, image 2 de 2
    • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

  4. Snowboard Binding Replacement: étape 4, image 1 de 3 Snowboard Binding Replacement: étape 4, image 2 de 3 Snowboard Binding Replacement: étape 4, image 3 de 3
    • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

    • Lift or slide the binding off the board and set the screws aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Loren Sunding

Membre depuis le 01/14/14

118 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 17-4, Forte Winter 2014 Membre de l'équipe Cal Poly, Team 17-4, Forte Winter 2014

CPSU-FORTE-W14S17G4

5 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 9

30 derniers jours : 88

Total : 13,386