Introduction

A rugged outdoor lifestyle may sometimes cause the cover, of your Solio Rocsta, to get dirty and/or damaged. In this guide, we will show you how to remove the top cover of the Solio Rocsta and replace it.

Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.
  • Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove top cover. Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .
  • Remove top cover.

  • Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .

Ajouter un commentaire

Using the spudger, pry the solar panel off the cover.
  • Using the spudger, pry the solar panel off the cover.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Denis Laesker

Membre depuis le 10/10/2017

101 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S13-G13, Cagle Fall 2017 Membre de l'équipe USF Tampa, Team S13-G13, Cagle Fall 2017

USFT-CAGLE-F17S13G13

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 19