Pièces

Aucune pièce nécessaire.

Push in the button next to the lens. While holding the button twist the lens counter-clockwise. Pull up and remove lens from camera.
  • Push in the button next to the lens.

  • While holding the button twist the lens counter-clockwise.

  • Pull up and remove lens from camera.

Ajouter un commentaire

Inside toward the top you will find a small slit in the plastic piece. Insert a flat head screw driver into the slit and pull down to access the focus lens. Insert a flat head screw driver into the slit and pull down to access the focus lens.
  • Inside toward the top you will find a small slit in the plastic piece.

  • Insert a flat head screw driver into the slit and pull down to access the focus lens.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Using tweezers grab the focus lens on the side by the two tabs that are on it. Do not grab the focus lens in the middle as this will damage the lens. Pull out and remove focus lens from camera.
  • Using tweezers grab the focus lens on the side by the two tabs that are on it.

  • Do not grab the focus lens in the middle as this will damage the lens.

  • Pull out and remove focus lens from camera.

Ajouter un commentaire

When inserting new focus make sure to orient it where the two tabs are facing towards you with the smaller tab facing up. Angle the focus lens to make installation  easier. Lay the new focus lens into the plastic tray.
  • When inserting new focus make sure to orient it where the two tabs are facing towards you with the smaller tab facing up.

  • Angle the focus lens to make installation easier.

  • Lay the new focus lens into the plastic tray.

  • It does not snap into place.

Ajouter un commentaire

Insert screw driver into the slit and push up to close. You can also use your thumb, if you are careful not to touch the lens as this could leave a smudge on the lens.
  • Insert screw driver into the slit and push up to close.

  • You can also use your thumb, if you are careful not to touch the lens as this could leave a smudge on the lens.

  • You will hear a click when the plastic tray is back in place.

Ajouter un commentaire

When re-installing the lens line up the orange dots that are one both lens and camera. Fit lens into place and turn clockwise to secure it back to camera.
  • When re-installing the lens line up the orange dots that are one both lens and camera.

  • Fit lens into place and turn clockwise to secure it back to camera.

Ajouter un commentaire

Conclusion

You have now completed a focus lens replacement.

Walter Littlefield

Membre depuis le 21/03/2018

265 Réputation

2 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 12

Total : 17