Introduction

This guide will show how to replace a bad fuse, which will cause the device not to turn on.

Before any repair work can be done, one must remove the device from the vehicle. To do so follow this link to see a vehicle general removal of a stereo system.

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

Locate the clip on the wiring harness.
  • Locate the clip on the wiring harness.

Ajouter un commentaire

Press down on the clip like you would an Ethernet cable. Rock harness side to side, pulling gently towards you until harness detaches.
  • Press down on the clip like you would an Ethernet cable.

  • Rock harness side to side, pulling gently towards you until harness detaches.

Ajouter un commentaire

Once you have removed the wiring harness.
  • Once you have removed the wiring harness.

  • Locate the fuse.

Ajouter un commentaire

Using your index finger and thumb on either side of the fuse.
  • Using your index finger and thumb on either side of the fuse.

Ajouter un commentaire

Rock back and forth gently pulling towards yourself until the fuse is removed.
  • Rock back and forth gently pulling towards yourself until the fuse is removed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Odelkys Marquez

Membre depuis le 22/09/2014

922 Réputation

7 tutoriels rédigés

Équipe

USF Tampa, Team 10-2, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 10-2, Brown Fall 2014

USFT-BROWN-F14S10G2

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 5

7 derniers jours : 34

30 derniers jours : 140

Total : 2,610