Aller au contenu principal

Sony Ericsson Z500a Keypad Replacement

Ce dont vous avez besoin

  1. Sony Ericsson Z500a Keypad Replacement, Keypad: étape 1, image 1 de 3 Sony Ericsson Z500a Keypad Replacement, Keypad: étape 1, image 2 de 3 Sony Ericsson Z500a Keypad Replacement, Keypad: étape 1, image 3 de 3
    • Remove the back cover by pulling it down, and then take out the battery.

    • Using a T6 Torx screwdriver, remove the 4 screws.

    • Keep the phone open with the back cover facing you.

  2. Sony Ericsson Z500a Keypad Replacement: étape 2, image 1 de 1
    • Use the plastic opening tool and run it between the case and the body of the device to loosen the keyboard

    • There are 2 clamps that lock the keyboard to the case (1 on each side)

  3. Sony Ericsson Z500a Keypad Replacement: étape 3, image 1 de 1
    • Flip the phone over and lift straight up on the key pad to remove it.

    • Be sure to hold the phone flat (parallel to the table) so that no loose parts fall out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

Membre depuis le 04/16/10

1 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 7-12, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 7-12, Maness Spring 2010

CPSU-MANESS-S10S7G12

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 2,721