Introduction

Use this guide to open the battery compartment and replace the battery.

We need to turn off the camera because we are removing components that could get damaged if the power is still on. If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.
  • We need to turn off the camera because we are removing components that could get damaged if the power is still on.

  • If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.

Ajouter un commentaire

Flip the camera over such that the power switch points down.
  • Flip the camera over such that the power switch points down.

  • Slide the switch on the bottom of the camera grip towards the lens to open the battery door.

Ajouter un commentaire

With the battery door open, push the blue lever in the battery compartment to release the battery.
  • With the battery door open, push the blue lever in the battery compartment to release the battery.

Ajouter un commentaire

Conclusion

To replace the battery, fit it in the slot, then close and lock the door.

2 autre(s) ont terminé cette réparation.

Tyler

Membre depuis le 22/04/2014

495 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 10-55, Amido Spring 2014 Membre de l'équipe Cal Poly, Team 10-55, Amido Spring 2014

CPSU-AMIDO-S14S10G55

4 membres

14 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 24

Total : 1,076