Introduction

If the LCD Display Screen is black, cracked, or has colored lines running through it when the computer is on, the screen is broken. Follow these instructions on how to install a screen

Pièces

Aucune pièce nécessaire.

Place the computer on a flat surface with the top facing up. Open the screen.
  • Place the computer on a flat surface with the top facing up.

  • Open the screen.

Ajouter un commentaire

Locate the rubber screw caps at the two bottom corners of the screen. Use your finger to remove the rubber screw caps. Use your finger to remove the rubber screw caps.
  • Locate the rubber screw caps at the two bottom corners of the screen.

  • Use your finger to remove the rubber screw caps.

Ajouter un commentaire

Locate the two screws, one on each bottom corner. Unscrew the screws with a Phillips head size #0 screwdriver.
  • Locate the two screws, one on each bottom corner.

  • Unscrew the screws with a Phillips head size #0 screwdriver.

  • Keep track of the screws. They are small and easy to misplace.

Ajouter un commentaire

Use a plastic opening tool to gently lift the plastic casing that borders the screen. Pop off the casing by working the tool around the outside of it. Wiggling the tool may be required. The casing could be fitted snugly.
  • Use a plastic opening tool to gently lift the plastic casing that borders the screen.

  • Pop off the casing by working the tool around the outside of it.

  • Wiggling the tool may be required. The casing could be fitted snugly.

Ajouter un commentaire

Carefully flip down the screen so it rests on the keyboard. Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection. Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.
  • Carefully flip down the screen so it rests on the keyboard.

  • Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.

Ajouter un commentaire

Remove the screen.
  • Remove the screen.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Andrew Ricker

Membre depuis le 04/04/2012

68 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 5-3, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 5-3, Forte Spring 2012

CPSU-FORTE-S12S5G3

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 6

Total : 2,917