Introduction

How to replace broken Digitizer Glass on Sony XPERIA E.


Please SUBSCRIBE to my channel ツ

Vidéo d'introduction

Switch-off the phone. Remove the battery. Remove the battery.
  • Switch-off the phone.

  • Remove the battery.

Ajouter un commentaire

The small bottom bezel is held by 2x locking clips. Preferably use plastic tools for disassembling. Preferably use plastic tools for disassembling.
  • The small bottom bezel is held by 2x locking clips.

  • Preferably use plastic tools for disassembling.

Ajouter un commentaire

There are 4x silver screws and 3x black screws. The rear cover is held by 5x locking clips. Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
  • There are 4x silver screws and 3x black screws.

  • The rear cover is held by 5x locking clips.

  • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

Ajouter un commentaire

Remove the back cover. With a plastic tool disconnect one by one: LCD Display flex cable
  • Remove the back cover.

  • With a plastic tool disconnect one by one:

    • LCD Display flex cable

    • Touchscreen flex cable

    • Menu Buttons Board flex cable

    • Coaxial Wire Antenna cable

Ajouter un commentaire

Carefully remove the main board. Carefully remove the main board.
  • Carefully remove the main board.

Ajouter un commentaire

Disconnect the other side of the flex cable and remove the Home Buttons board. Unstick the camera button. Unstick the camera button.
  • Disconnect the other side of the flex cable and remove the Home Buttons board.

  • Unstick the camera button.

Ajouter un commentaire

The touch screen is stuck to the frame with double side adhesive tape. By using plastic tools gently start separating. At the bottom is glued on firmly because the bonded surface is larger.
  • The touch screen is stuck to the frame with double side adhesive tape.

  • By using plastic tools gently start separating.

  • At the bottom is glued on firmly because the bonded surface is larger.

  • Use a hot air to make separating more easy and safety.

Ajouter un commentaire

With a plastic tool, carefully separate the LCD display from the touch screen. Clear the touchscreen from the old adhesive tape. Clear the touchscreen from the old adhesive tape.
  • With a plastic tool, carefully separate the LCD display from the touch screen.

  • Clear the touchscreen from the old adhesive tape.

Ajouter un commentaire

Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.
  • Install the new LCD into the frame and put adhesive tape.

  • Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.

Ajouter un commentaire

To reassemble your device, follow these instructions in reverse order.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

150 424 Réputation

424 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

274 membres

712 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 33

Total : 4,517