Introduction

It is one of the easier components to reach and replace. I will teach you how to remove it if it needs to be replaced.

Pièces

Aucune pièce nécessaire.

Use the plastic opening tool to pry the top plastic section off. Use the plastic opening tool to pry the top plastic section off. Use the plastic opening tool to pry the top plastic section off.
  • Use the plastic opening tool to pry the top plastic section off.

Ajouter un commentaire

Use the plastic opening tool to pry the bottom plastic section off. Use the plastic opening tool to pry the bottom plastic section off.
  • Use the plastic opening tool to pry the bottom plastic section off.

Ajouter un commentaire

Remove the four 5mm screws. Use the plastic opening tool to pry off the back. Use the plastic opening tool to pry off the back.
  • Remove the four 5mm screws.

  • Use the plastic opening tool to pry off the back.

Ajouter un commentaire

Use the plastic opening tool to remove the loud speaker module. Use the plastic opening tool to remove the loud speaker module. Use the plastic opening tool to remove the loud speaker module.
  • Use the plastic opening tool to remove the loud speaker module.

Ajouter un commentaire

Use the plastic opening tool to unlatch the cord's ends off the motherboard and loud speaker module. The cord can be located on the right side of the phone. Use the plastic opening tool to unlatch the cord's ends off the motherboard and loud speaker module. The cord can be located on the right side of the phone.
  • Use the plastic opening tool to unlatch the cord's ends off the motherboard and loud speaker module. The cord can be located on the right side of the phone.

Ajouter un commentaire

Unhook the 2 connections between the harness and phone shell. Using the plastic opening tool, pry the harness up and remove it. There is an adhesive on the bottom half of the battery harness.
  • Unhook the 2 connections between the harness and phone shell.

  • Using the plastic opening tool, pry the harness up and remove it.

  • There is an adhesive on the bottom half of the battery harness.

Ajouter un commentaire

The final step is taking the entire harness off of the phone.
  • The final step is taking the entire harness off of the phone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Adam Giniger

Membre depuis le 22/09/2014

1 136 Réputation

8 tutoriels rédigés

Équipe

USF Tampa, Team 4-4, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 4-4, Brown Fall 2014

USFT-BROWN-F14S4G4

3 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 198