Introduction

If your back case is cracked or broken this guide will show you how it is removed and replaced.

Remove the battery cover. Remove the AAA batteries from the calculator.
  • Remove the battery cover.

  • Remove the AAA batteries from the calculator.

Ajouter un commentaire

Remove the 5mm Philips #00 screw holding backup battery cover.
  • Remove the 5mm Philips #00 screw holding backup battery cover.

  • Remove the backup battery cover.

Ajouter un commentaire

Use plastic opening tool to remove the backup battery.  Place the tool in the small cut-out next to the battery and pry the battery out.
  • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

  • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

Ajouter un commentaire

Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.
  • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

Ajouter un commentaire

Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart. Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.
  • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Jared

Membre depuis le 02/10/2012

76 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 18-37, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 18-37, Regan Fall 2012

CPSU-REGAN-F12S18G37

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 16

30 derniers jours : 64

Total : 6,713