Introduction

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Pièces

Aucune pièce nécessaire.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Ajouter un commentaire

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Ajouter un commentaire

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Ajouter un commentaire

Locate the power supply.
  • Locate the power supply.

Ajouter un commentaire

Remove the belt connecting the power supply to the motherboard by pulling it out.
  • Remove the belt connecting the power supply to the motherboard by pulling it out.

Ajouter un commentaire

Remove the red, yellow, and black cable connecting the power supply to the hard drive.
  • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

Ajouter un commentaire

Remove the two 0.31 inch T-9 screws from the power supply.
  • Remove the two 0.31 inch T-9 screws from the power supply.

Ajouter un commentaire

Pinch the plastic plugs and lift the power supply up to detach from plugs. All 4 plugs must be detached to remove power supply.
  • Pinch the plastic plugs and lift the power supply up to detach from plugs.

  • All 4 plugs must be detached to remove power supply.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Membre depuis le 11/10/2011

41 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 5-33, Amido Fall 2011 Membre de l'équipe Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 1,042