Introduction

This guide is for if you conclude that your difficulty with braking is due to your brake cables being too loose.

Pièces

Aucune pièce nécessaire.

Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.
  • Loosen the bolt that clamps the brake cable on the brake caliper with the 10mm open-end wrench.

Ajouter un commentaire

Pull the brake cable until proper tension is acquired and the cable shows resistance.
  • Pull the brake cable until proper tension is acquired and the cable shows resistance.

Ajouter un commentaire

Re-tighten the clamping nut.
  • Re-tighten the clamping nut.

Ajouter un commentaire

If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.
  • If necessary, adjust the positioning of the caliper arms by loosening the dome nut at the pivot point and manually shifting the arms in the desired direction.

Ajouter un commentaire

For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.
  • For more precise adjustment of the brake cable tension, use pliers to tighten the barrel nut at the opposite ends of the handlebars on the brake levers.

Ajouter un commentaire

Conclusion

Your brakes should be fully tightened now.

5 autre(s) ont terminé cette réparation.

Samantha Rawlins

Membre depuis le 21/01/2014

386 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 1-40, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 1-40, Maness Winter 2014

CPSU-MANESS-W14S1G40

4 membres

5 tutoriels rédigés

Thank God I didn’t have to watch someone's long winded 10 minute video explaining this.  lol Thank you for that!  Great article.  Thanks for helping me out!

rtinmotion - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 20

Total : 1,706