Pièces

Aucune pièce nécessaire.

Using the spudger, gently pry the desired key up on one side. This will release the key.
  • Using the spudger, gently pry the desired key up on one side. This will release the key.

  • The key is held in place by very small plastic pieces. Improper removal or installation may damage key permanently and require entire keyboard replacement.

Ajouter un commentaire

Use a brush to remove debris and use a cleaner cloth to remove residue. Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.
  • Use a brush to remove debris and use a cleaner cloth to remove residue.

  • Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.

Ajouter un commentaire

Once clean, set the key above its original position and firmly press it back into place.
  • Once clean, set the key above its original position and firmly press it back into place.

  • If cleaned and installed properly the key should depress smoothly and spring back to normal position once released.

Ajouter un commentaire

Conclusion

This is a complete guide to removing a key and cleaning the area before replacement.

Mason McCaskill

Membre depuis le 18/10/2013

943 Réputation

9 tutoriels rédigés

Équipe

Clemson, Team 14-2, Benson Fall 2013 Membre de l'équipe Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 299