Pièces

Aucune pièce nécessaire.

Using the plastic opening tool, remove the plastic hinge cover on the back of the laptop. Use caution not to damage this plastic cover.
  • Using the plastic opening tool, remove the plastic hinge cover on the back of the laptop. Use caution not to damage this plastic cover.

Ajouter un commentaire

Using the plastic opening tool, remove the plastic cover directly above the keyboard. Make sure to start from the corners of the plastic cover.
  • Using the plastic opening tool, remove the plastic cover directly above the keyboard. Make sure to start from the corners of the plastic cover.

Ajouter un commentaire

Using the #1 Phillips head screwdriver,  remove the two 3.8mm screws.
  • Using the #1 Phillips head screwdriver, remove the two 3.8mm screws.

Ajouter un commentaire

Remove the keyboard, make sure you gently remove any ribbon cables holding it to the rest of the computer. Bending or crimping a ribbon cable can break the device.
  • Remove the keyboard, make sure you gently remove any ribbon cables holding it to the rest of the computer. Bending or crimping a ribbon cable can break the device.

Ajouter un commentaire

Use a small phillips screwdriver to remove both metal shields as depicted. Use a small phillips screwdriver to remove both metal shields as depicted.
  • Use a small phillips screwdriver to remove both metal shields as depicted.

Ajouter un commentaire

After removing the second metal covering you will remove the RAM compartment. Simply pull apart the metal fasteners on the side; the RAM should pop out for removal.
  • After removing the second metal covering you will remove the RAM compartment.

  • Simply pull apart the metal fasteners on the side; the RAM should pop out for removal.

Ajouter un commentaire

Disconnect the wire from the exposed wireless card. Pry open the top of the laptop and gently remove and disconnect the wires as shown. Pry open the top of the laptop and gently remove and disconnect the wires as shown.
  • Disconnect the wire from the exposed wireless card.

  • Pry open the top of the laptop and gently remove and disconnect the wires as shown.

Ajouter un commentaire

Remove the screws attaching the motherboard to the plastic housing. Lift off the motherboard. Once it is free of screws and you're done!
  • Remove the screws attaching the motherboard to the plastic housing.

  • Lift off the motherboard. Once it is free of screws and you're done!

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Dustin

Membre depuis le 12/03/2014

921 Réputation

7 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 646