Introduction

This repair guide will give you the steps to follow to replace the keyboard of your device.

Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver
  • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver

Ajouter un commentaire

Locate the hidden screw found in the middle of the back hard cover.
  • Locate the hidden screw found in the middle of the back hard cover.

    • The hidden screw is found under the rubber cover shown in picture.

  • Here you will find a proprietary Japanese screw head.

    • Remove the screw with your own tool (not provided by IFixit) or by using the methods found here.

Ajouter un commentaire

Peel off the hardcover on the back of the device to expose the interior of the device.
  • Peel off the hardcover on the back of the device to expose the interior of the device.

    • Force may be required, but the hardcover should detach smoothly.

Ajouter un commentaire

Remove the six screws using a Phillips #1 screwdriver.
  • Remove the six screws using a Phillips #1 screwdriver.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the white Bundled Cable Connector by gently pulling it out of the socket. Follow the guide here.
  • Remove the white Bundled Cable Connector by gently pulling it out of the socket. Follow the guide here.

    • Plug should easily detach with little force.

Ajouter un commentaire

Lift the battery up by its sides. The battery should easily come off.
  • Lift the battery up by its sides. The battery should easily come off.

Ajouter un commentaire

Locate two ZIF (Zero Insert Force) connector cables underneath the battery.

Ajouter un commentaire

Remove the two cables by following the direction here.
  • Remove the two cables by following the direction here.

    • The cables should come off easily.

Ajouter un commentaire

  • Flip the device over to access the keyboard.

  • Insert the Opening Tool into the crevice on one side of keyboard frame.

  • Pry off the keyboard using the tool.

Ajouter un commentaire

Pull off the rest of the keyboard with your hands when you're able to easily grab underneath the keyboard.
  • Pull off the rest of the keyboard with your hands when you're able to easily grab underneath the keyboard.

    • The keyboard will be taped underneath but will easily detach.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dominic Whiting

Membre depuis le 08/02/2018

761 Réputation

5 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 90