Introduction

In this guide, you will learn in a step by step process how to remove an optical drive in your Toshiba Satellite. This guide does require some tool use. Follow each step according to the bullets provided.

Pièces

Aucune pièce nécessaire.

Unplug the AC adapter and all other auxiliary components from the laptop. Slide the battery lock tab away from the center of the laptop to unlock the battery.
  • Unplug the AC adapter and all other auxiliary components from the laptop.

  • Slide the battery lock tab away from the center of the laptop to unlock the battery.

Ajouter un commentaire

Slide the battery release tab away from the center of the laptop and hold it. Lifting from the small notch between the two tabs, pull the battery out of the laptop.
  • Slide the battery release tab away from the center of the laptop and hold it.

  • Lifting from the small notch between the two tabs, pull the battery out of the laptop.

Ajouter un commentaire

Remove the screw holding the RAM cover with a PH1 screwdriver. Remove the RAM cover.
  • Remove the screw holding the RAM cover with a PH1 screwdriver.

  • Remove the RAM cover.

Ajouter un commentaire

Push outwards on the metal tabs to release the RAM. Remove the RAM.  Some force may be needed. Be careful not to touch the gold pins on the RAM chips as there may be a build-up of static electricity.  This can fry the parts of the chip that houses memory.
  • Push outwards on the metal tabs to release the RAM.

  • Remove the RAM. Some force may be needed.

  • Be careful not to touch the gold pins on the RAM chips as there may be a build-up of static electricity. This can fry the parts of the chip that houses memory.

Ajouter un commentaire

Use a PH0 screwdriver to remove the screw holding the optical drive in place. Using your index finger, push the metal tab inside the RAM bay which is located directly underneath the screw-hole. The optical drive will then slide out.
  • Use a PH0 screwdriver to remove the screw holding the optical drive in place.

  • Using your index finger, push the metal tab inside the RAM bay which is located directly underneath the screw-hole.

  • The optical drive will then slide out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bret Wilson

Membre depuis le 11/04/2013

208 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 17-5, Regan Spring 2013 Membre de l'équipe Cal Poly, Team 17-5, Regan Spring 2013

CPSU-REGAN-S13S17G5

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 12

Total : 1,227