Introduction

This guide teaches you how to replace the screen for the Toshiba Satellite A305-S6848

Pièces

Aucune pièce nécessaire.

Close laptop and turn it upside down.
  • Close laptop and turn it upside down.

Ajouter un commentaire

Move the left locking hatch to the left.
  • Move the left locking hatch to the left.

  • Hold the right spring latch to the right.

Ajouter un commentaire

Carefully remove the battery from the laptop.
  • Carefully remove the battery from the laptop.

Ajouter un commentaire

Remove the 6 rubber tabs on the housing using the metal spudger. Remove the 6 rubber tabs on the housing using the metal spudger.
  • Remove the 6 rubber tabs on the housing using the metal spudger.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the six 5.8 mm screws using the Phillip's #0 screwdriver. Remove the six 5.8 mm screws using the Phillip's #0 screwdriver.
  • Remove the six 5.8 mm screws using the Phillip's #0 screwdriver.

Ajouter un commentaire

Pry out plastic housing on all sides.
  • Pry out plastic housing on all sides.

Ajouter un commentaire

Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger. Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.
  • Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.

Ajouter un commentaire

Remove the four 5.8 mm screws using the Phillip's #0 screwdriver. Remove the four 5.8 mm screws using the Phillip's #0 screwdriver.
  • Remove the four 5.8 mm screws using the Phillip's #0 screwdriver.

Ajouter un commentaire

Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip's #0 screwdriver.
  • Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip's #0 screwdriver.

Ajouter un commentaire

Pull the screen down. Pull off tape and take our video connector.
  • Pull the screen down.

  • Pull off tape and take our video connector.

Ajouter un commentaire

Remove cold cathode fluorescent light bulb connector.
  • Remove cold cathode fluorescent light bulb connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua E Hong

Membre depuis le 06/11/2017

401 Réputation

4 tutoriels rédigés

Équipe

Baylor, Team S8-G1, Johnson Fall 2017 Membre de l'équipe Baylor, Team S8-G1, Johnson Fall 2017

BU-JOHNSON-F17S8G1

2 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 60