Push the left tab with your left hand. Then push the right tab with your right hand. While your right hand is still pushing, remove the battery with your left hand.
  • Push the left tab with your left hand.

  • Then push the right tab with your right hand.

  • While your right hand is still pushing, remove the battery with your left hand.

Ajouter un commentaire

Remove one screw with a JIS #000 screwdriver. This screw does not come completely out, but you will still be able to get the panel off.
  • Remove one screw with a JIS #000 screwdriver.

  • This screw does not come completely out, but you will still be able to get the panel off.

Ajouter un commentaire

Use the plastic opening tool to pry open the back panel. Make sure to loosen all four sides then lift up.
  • Use the plastic opening tool to pry open the back panel. Make sure to loosen all four sides then lift up.

Ajouter un commentaire

Remove a .5mm screw with a JIS #000 screwdriver. Remove a .5mm screw with a JIS #000 screwdriver.
  • Remove a .5mm screw with a JIS #000 screwdriver.

Ajouter un commentaire

Using a plastic opening tool, pry open the disk drive. Once it has loosened it will pull out. Using a plastic opening tool, pry open the disk drive. Once it has loosened it will pull out.
  • Using a plastic opening tool, pry open the disk drive. Once it has loosened it will pull out.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Take a nylon spudger and push the prongs so that it releases the RAM. Take a nylon spudger and push the prongs so that it releases the RAM.
  • Take a nylon spudger and push the prongs so that it releases the RAM.

Ajouter un commentaire

Once the RAM has lifted, use tweezers or fingers to pull it out.
  • Once the RAM has lifted, use tweezers or fingers to pull it out.

Ajouter un commentaire

Remove the single .5mm JIS #000 screw. Remove the single .5mm JIS #000 screw.
  • Remove the single .5mm JIS #000 screw.

Ajouter un commentaire

Use the plastic opening tool to remove the keyboard from the laptop.
  • Use the plastic opening tool to remove the keyboard from the laptop.

Ajouter un commentaire

Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop. Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.
  • Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

Ajouter un commentaire

Remove thirteen JIS #000 11mm screws.
  • Remove thirteen JIS #000 11mm screws.

Ajouter un commentaire

Use a nylon spudger tool to lift up on all sides. Once the panel has been loosened it will pop off.
  • Use a nylon spudger tool to lift up on all sides.

  • Once the panel has been loosened it will pop off.

Ajouter un commentaire

Remove five 11mm JIS #000 screws.
  • Remove five 11mm JIS #000 screws.

Ajouter un commentaire

Remove the four wires with tweezers. Remove wires gently to avoid damaging them. Remove wires gently to avoid damaging them.
  • Remove the four wires with tweezers.

  • Remove wires gently to avoid damaging them.

Ajouter un commentaire

Lift from corresponding sides of the fan and it'll pop right out.
  • Lift from corresponding sides of the fan and it'll pop right out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Robin

Membre depuis le 08/02/2018

181 Réputation

1 tutoriel rédigé

Équipe

Sam Houston State, Team S16-G1, Nardone Spring 2018 Membre de l'équipe Sam Houston State, Team S16-G1, Nardone Spring 2018

SHSU-NARDONE-S18S16G1

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 16

Total : 48