Introduction

The wifi card enables the computer to be compatible with wifi. If the card is malfunctioning, the computer will not receive a signal from any wifi sources. This guide shows how to remove the wifi card so it can be replaced.

Unscrew the Phillips #1 4mm screw from the middle panel using a Phillips #1 screwdriver.
  • Unscrew the Phillips #1 4mm screw from the middle panel using a Phillips #1 screwdriver.

Ajouter un commentaire

Remove the middle panel by lifting up and out.
  • Remove the middle panel by lifting up and out.

Ajouter un commentaire

Remove the two Phillips #1 6mm screws from the wifi card using a Phillips #1 screwdriver.
  • Remove the two Phillips #1 6mm screws from the wifi card using a Phillips #1 screwdriver.

Add markers indicating where the screws are.

Atlanta Nguyen - Réponse

Unsnap the two cables from the wifi card.
  • Unsnap the two cables from the wifi card.

Add markers indicating where cables are.

Atlanta Nguyen - Réponse

Remove the wifi card using your hands.
  • Remove the wifi card using your hands.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

NateJohnson

Membre depuis le 26/01/2014

967 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 9-26, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 9-26, Maness Winter 2014

CPSU-MANESS-W14S9G26

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 11

Total : 763