Pièces

Aucune pièce nécessaire.

Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.
  • Use tweezers to remove the small rubber covers over the screws on the top and bottom of the laptop case.

Ajouter un commentaire

Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners. Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.
  • Use a #1 Phillips screwdriver to remove the 3mm screws located on both sides of the top of the laptop as well as the lower corners.

Ajouter un commentaire

Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop. Carefully pull the top away from the back. Carefully pull the top away from the back.
  • Use a plastic opening tool to separate the front plastic panel from the back side of the top of the laptop.

  • Carefully pull the top away from the back.

Ajouter un commentaire

Turn the laptop around. Remove the webcam/microphone data cable. Remove the webcam/microphone data cable.
  • Turn the laptop around.

  • Remove the webcam/microphone data cable.

Ajouter un commentaire

Remove the lower lighting power supply. Remove the signal light power supply and data cable.
  • Remove the lower lighting power supply.

  • Remove the signal light power supply and data cable.

Ajouter un commentaire

Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display. After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.
  • Locate and remove the four 2mm #1 Phillips screws around the sidewalls of the display.

  • After removing the last screw, the screen will be very loose, be sure to keep a hand on it to prevent it from damaging the keyboard.

Ajouter un commentaire

Carefully remove the screen from the side brackets. Remove the LCD ribbon connector from the display.
  • Carefully remove the screen from the side brackets.

  • Remove the LCD ribbon connector from the display.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Brandon Kirklen

Membre depuis le 11/01/2013

269 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 7-8, Maness Winter 2013 Membre de l'équipe Cal Poly, Team 7-8, Maness Winter 2013

CPSU-MANESS-W13S7G8

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 535