Introduction

The keyboard needs to be removed to access everything (hard drive, optical drive, RAM, motherboard).

Pièces

Aucune pièce nécessaire.

With the battery away from you, slide the locking clips out. The left clip stays, the right clip is spring loaded.
  • With the battery away from you, slide the locking clips out.

    • The left clip stays, the right clip is spring loaded.

  • Slide the battery away from you.

Ajouter un commentaire

Use a spudger to carefully pry up the keyboard screw cover.
  • Use a spudger to carefully pry up the keyboard screw cover.

Ajouter un commentaire

Remove the two screws securing the keyboard to the chassis.
  • Remove the two screws securing the keyboard to the chassis.

Ajouter un commentaire

Carefully tilt the keyboard towards you and release the ribbon cables.
  • Carefully tilt the keyboard towards you and release the ribbon cables.

  • Use a spudger if needed to release the latch. The latch slides out.

  • The keyboard is now free and can be set aside.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Tyler

Membre depuis le 19/06/2012

3 997 Réputation

18 tutoriels rédigés

Équipe

TechForce Membre de l'équipe TechForce

Business

2 membres

18 tutoriels rédigés

What is the brass colored ribbon for? Mine is broken will it effect funconality , if so how do i fix it

Kathleen T - Réponse

If I remember correctly, this keyboard is backlit. Most likely the copper cable is for the backlit power. A new keyboard would need to be purchased to fix it.

Tyler - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 370