Introduction

If a fan stops working all together on this device, then replacing it can be a good way to save money over buying a new projector. This guide will show how to get to and replace this part.

Start by removing the two screws on the bottom of the device as shown. Start by removing the two screws on the bottom of the device as shown. Start by removing the two screws on the bottom of the device as shown.
  • Start by removing the two screws on the bottom of the device as shown.

Ajouter un commentaire

Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool. Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
  • Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.

  • Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.

Ajouter un commentaire

Remove the screws from the case located around the device. Remove the screws from the case located around the device. Remove the screws from the case located around the device.
  • Remove the screws from the case located around the device.

Three screws?

lkmemphis - Réponse

Remove the plastic panels from the body.
  • Remove the plastic panels from the body.

“X Honeycomb panels” How many panels are removed?

lkmemphis - Réponse

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the screws from the IO panel. Pull up on the panel and remove it. Pull up on the panel and remove it.
  • Remove the screws from the IO panel.

  • Pull up on the panel and remove it.

Again, how many screws?

lkmemphis - Réponse

Unscrew the screws from the metal shielding to remove it. Unscrew the screws from the metal shielding to remove it.
  • Unscrew the screws from the metal shielding to remove it.

How many screws?

lkmemphis - Réponse

Remove cables from motherboard. Unscrew motherboard and remove from device. Unscrew motherboard and remove from device.
  • Remove cables from motherboard.

  • Unscrew motherboard and remove from device.

Any warnings about handling the motherboard?

lkmemphis - Réponse

Remove the cable from the bottom of the motherboard to fully remove it.
  • Remove the cable from the bottom of the motherboard to fully remove it.

Ajouter un commentaire

Unscrew the power adapter on the back.
  • Unscrew the power adapter on the back.

Ajouter un commentaire

Remove cables from the power supply board. Remove the screws located around the board to un-mount it.
  • Remove cables from the power supply board.

  • Remove the screws located around the board to un-mount it.

Ajouter un commentaire

Remove the power board to reveal the bottom two screws to the fan.
  • Remove the power board to reveal the bottom two screws to the fan.

  • Unscrew the fan and replace it with an equivalent one.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

Membre depuis le 02/04/2018

697 Réputation

5 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 13