Outils

Aucun outil requis.

Pièces

You will need to make sure to acquire a light mount such as the one in the picture. You will want to pick a spot - like the one illustrated with the red box - to place the mount.
  • You will need to make sure to acquire a light mount such as the one in the picture.

  • You will want to pick a spot - like the one illustrated with the red box - to place the mount.

Ajouter un commentaire

Make sure the surface where the mount is being placed is clean.
  • Make sure the surface where the mount is being placed is clean.

  • Next, you will wrap the light mount around the handlebars.

Ajouter un commentaire

Locate the slot for which the strap will be slid through.
  • Locate the slot for which the strap will be slid through.

  • Slip the strap through the allotted hole.

Ajouter un commentaire

Pull the strap tight and put it through the clasps at the bottom of the mount.
  • Pull the strap tight and put it through the clasps at the bottom of the mount.

Ajouter un commentaire

Take the screw and put it in the hole. Twist the screw until fully fastened.
  • Take the screw and put it in the hole.

  • Twist the screw until fully fastened.

  • Your light mount is now ready for use.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kaveh Karimiyanha

Membre depuis le 24/09/2012

759 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 1-1, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 1-1, Propen Fall 2012

CPSU-PROPEN-F12S1G1

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 650