Pièces

Aucune pièce nécessaire.

Hold the on/off button for 3 seconds until the screen is black.
  • Hold the on/off button for 3 seconds until the screen is black.

  • Remove batteries by placing thumb on battery plate cover sliding it down to expose batteries.

  • Turn camera upside down to allow the batteries to fall out.

Ajouter un commentaire

There are 5 (4.5mm in length) screws on the sides of the camera that need to be removed. Use a Phillips #000 screwdriver to remove all screws. Remove 2 screws on the right side of the camera, and store them on a magnetic mat. Remove 2 screws on the bottom of the camera, and store them on a magnetic mat.
  • There are 5 (4.5mm in length) screws on the sides of the camera that need to be removed. Use a Phillips #000 screwdriver to remove all screws.

  • Remove 2 screws on the right side of the camera, and store them on a magnetic mat.

  • Remove 2 screws on the bottom of the camera, and store them on a magnetic mat.

  • Remove 1 screw on the left side of the camera, and store it on a magnetic mat.

Ajouter un commentaire

Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera. Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera.
  • Using a prying tool or fingernail, gently separate the back plate from the front plate, exposing the inside of the camera.

Ajouter un commentaire

Remove the 4.5mm screw with the iFixit ph#00 screwdriver
  • Remove the 4.5mm screw with the iFixit ph#00 screwdriver

Ajouter un commentaire

With your fingers, gently pull the two pieces of the battery case apart.  At this point, the battery door should be exposed With your fingers, gently pull the two pieces of the battery case apart.  At this point, the battery door should be exposed
  • With your fingers, gently pull the two pieces of the battery case apart. At this point, the battery door should be exposed

Ajouter un commentaire

With your fingers, gently remove the battery door.
  • With your fingers, gently remove the battery door.

  • Now you are free to repair or replace the battery door! Follow these steps in reverse order to reassemble the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Elise Brown

Membre depuis le 26/10/2014

70 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team 8-15, Williams Fall 2014 Membre de l'équipe Baylor, Team 8-15, Williams Fall 2014

BU-WILLIAMS-F14S8G15

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 135