Introduction

Use this guide to replace the blade on your device.

Pièces

Aucune pièce nécessaire.

Unscrew the two 3.8 mm Phillip head screws located on the blade using a Phillip's #0 screwdriver. Unscrew the two 3.8 mm Phillip head screws located on the blade using a Phillip's #0 screwdriver.
  • Unscrew the two 3.8 mm Phillip head screws located on the blade using a Phillip's #0 screwdriver.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Unscrew the 6.2 mm Phillip head screw using a Phillip's #1 screwdriver and remove the blade. Unscrew the 6.2 mm Phillip head screw using a Phillip's #1 screwdriver and remove the blade. Unscrew the 6.2 mm Phillip head screw using a Phillip's #1 screwdriver and remove the blade.
  • Unscrew the 6.2 mm Phillip head screw using a Phillip's #1 screwdriver and remove the blade.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sophia Swearengin

Membre depuis le 26/09/2017

501 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S14-G5, Boczar Fall 2017 Membre de l'équipe USF Tampa, Team S14-G5, Boczar Fall 2017

USFT-BOCZAR-F17S14G5

2 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 21

Total : 93