Réparez vos affaires Communauté Boutique

Yamaha YPG-225 Keys Replacement

Introduction

Learn to remove and replace a broken key for your keyboard with this guide. The process is fairly simple and mostly requires the removal of screws.

Ce dont vous avez besoin

  1. Yamaha YPG-225 Keys Replacement, Batteries: étape 1, image 1 de 1

    • Turn the keyboard over so that the keys are facing the ground.

    Traduire

  2. Yamaha YPG-225 Keys Replacement: étape 2, image 1 de 1

    • Pop the tabs on the battery casing and remove it from the back plate.

    Traduire

  3. Yamaha YPG-225 Keys Replacement: étape 3, image 1 de 1

    • Locate the six batteries and remove them from the battery cavity.

    Traduire

  4. Yamaha YPG-225 Keys Replacement, Faceplate: étape 4, image 1 de 1

    • Remove the six 10mm screws at the top of the backplate.

    Traduire

  6. Yamaha YPG-225 Keys Replacement: étape 5, image 1 de 1

    • Remove the seven 12mm screws in the middle of the back plate.

    Traduire

  7. Yamaha YPG-225 Keys Replacement: étape 6, image 1 de 1

    • Remove the eight 10mm screws from the side and the bottom of the back plate.

    Traduire

  8. Yamaha YPG-225 Keys Replacement: étape 7, image 1 de 1

    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard.

    Traduire

  9. Yamaha YPG-225 Keys Replacement: étape 8, image 1 de 2 Yamaha YPG-225 Keys Replacement: étape 8, image 2 de 2

    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

    Traduire

  10. Yamaha YPG-225 Keys Replacement, Keys: étape 9, image 1 de 1

    • Remove the 32mm screws that hold keys down.

    • Depending on which block of keys you wish to remove, there may be four screws instead of three.

    Traduire

  11. Yamaha YPG-225 Keys Replacement: étape 10, image 1 de 1

    • Remove the block of keys that holds the key you wish to install.

    • To do this, apply a small force away from the top of the keys and slightly toward the floor.

    • If done correctly, the block of keys will come to a slight downward angle.

    Traduire

  12. Yamaha YPG-225 Keys Replacement: étape 11, image 1 de 2 Yamaha YPG-225 Keys Replacement: étape 11, image 2 de 2

    • Press the tab on the back side of the block of keys out and detach the black keys.

    Traduire

  13. Yamaha YPG-225 Keys Replacement: étape 12, image 1 de 1

    • Remove the individual white key(s) or the black key set(s) that require replacement.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Kevin Green

Membre depuis le 09/18/12

308 Réputation

2 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team 2-62, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-62, Propen Fall 2012

CPSU-PROPEN-F12S2G62

2 membres

6 tutoriels rédigés

3 commentaires

Excellent, Although I've got a different type of yamaha keyboard, still good inside info.

Diederick Fokker - Réponse

Great article. Thank you so much.

Andreas Devig - Réponse

The instructions were very good and easy to understand. Question on the same subject. How about keys that have popped up on the key bed.

Donald Bryant - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 13

Total : 21,160