Using a spudger, remove the back panel of the phone.
  • Using a spudger, remove the back panel of the phone.

Ajouter un commentaire

Remove the battery and SD card from the phone. Remove the battery and SD card from the phone.
  • Remove the battery and SD card from the phone.

Ajouter un commentaire

Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.
  • Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.

Ajouter un commentaire

Remove the back piece, exposing the motherboard.
  • Remove the back piece, exposing the motherboard.

Ajouter un commentaire

Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place.
  • Flip up the three small tan clips holding the ribbons in place.

Ajouter un commentaire

Gently slide each of the three ribbons out of the motherboard.
  • Gently slide each of the three ribbons out of the motherboard.

Ajouter un commentaire

Slide the motherboard off of the ribbons detaching it from the front of the phone.
  • Slide the motherboard off of the ribbons detaching it from the front of the phone.

Excelente gráfica,gran aporte

Juan - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Lilia Johnson

Membre depuis le 08/10/2014

571 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 9-5, Leahy Fall 2014 Membre de l'équipe USF Tampa, Team 9-5, Leahy Fall 2014

USFT-LEAHY-F14S9G5

3 membres

5 tutoriels rédigés

Zte blade a506 insert sim card problem

Ali Jaffar - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 5

7 derniers jours : 19

30 derniers jours : 90

Total : 2,577