Introduction

Using the Phillips #0 screw driver and the plastic opening tool we will open the back, unscrew components holding the battery and remove the battery.

First remove the SD card and the Sim card from the device.
  • First remove the SD card and the Sim card from the device.

  • The Sim and SD cards are not shown here as our device did not come with them.

Ajouter un commentaire

Use an plastic opening tool or your hands to peel the back off the device. Use an plastic opening tool or your hands to peel the back off the device.
  • Use an plastic opening tool or your hands to peel the back off the device.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the two screws (1.6mm) that secure the battery cable port using the Phillips #0 screwdriver head from the plastic tool kit. Remove the metal cover.
  • Remove the two screws (1.6mm) that secure the battery cable port using the Phillips #0 screwdriver head from the plastic tool kit.

  • Remove the metal cover.

Ajouter un commentaire

Unclip the battery cable from its port with plastic opening tool. Unclip the battery cable from its port with plastic opening tool.
  • Unclip the battery cable from its port with plastic opening tool.

Ajouter un commentaire

Pry battery from adhesive with your hands or plastic opening tool.
  • Pry battery from adhesive with your hands or plastic opening tool.

  • Do not puncture the battery with plastic opening tool.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Gonzalez

Membre depuis le 29/01/2018

445 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S5-G2, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S5-G2, Passmore Spring 2018

USFT-PASSMORE-S18S5G2

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 34