Introduction

This is a guide to replacing the Back Cover on the Zune Flash 2nd Generation.

Pièces

Aucune pièce nécessaire.

Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure. If the device turns on while it is being disassembled it could cause irreversible damage to the device.
  • Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure.

  • If the device turns on while it is being disassembled it could cause irreversible damage to the device.

  • PICS MAKE NO SENSE.

Ajouter un commentaire

Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images. You should hear a 'click' as the clip detaches from the device.
  • Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images.

  • You should hear a 'click' as the clip detaches from the device.

Ajouter un commentaire

Remove the two screws shown using a small Tri-Wing screwdriver.
  • Remove the two screws shown using a small Tri-Wing screwdriver.

  • You will need to use a very small Tri-Wing screwdriver to ensure that you do not strip the screws.

Ajouter un commentaire

Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device. Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device. Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.
  • Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.

Ajouter un commentaire

Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside. Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside. Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.
  • Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

ybahman

Membre depuis le 01/11/2009

118 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 9-20, Regan Fall 2009 Membre de l'équipe Cal Poly, Team 9-20, Regan Fall 2009

CPSU-REGAN-F09S9G20

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 3,209