Introduction

Upgrade your RAM DIMM Module for more memory.

Pièces

Aucune pièce nécessaire.

Place the computer monitor face down on a safe, harmless surface. Using a  Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.
  • Place the computer monitor face down on a safe, harmless surface.

  • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

Ajouter un commentaire

Remove the metal plate from bottom of the iMac G4.
  • Remove the metal plate from bottom of the iMac G4.

  • The four screws do not completely separate from the metal plate.

Ajouter un commentaire

Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM. These tabs lock the module in place and releasing them will cause the module to "pop" up.
  • Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM.

  • These tabs lock the module in place and releasing them will cause the module to "pop" up.

  • Remove the RAM module from the iMac.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autre(s) ont terminé cette réparation.

Ryan Kozak

Membre depuis le 10/10/2011

1 091 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 5-32, Amido Fall 2011 Membre de l'équipe Cal Poly, Team 5-32, Amido Fall 2011

CPSU-AMIDO-F11S5G32

4 membres

8 tutoriels rédigés

Please correct the title, this is a 144 pin SODIMM, it is not a DIMM

The 168 pin DIMM is used in the internal socket.

Canadaram - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 25

Total : 4,362