Introduction
How to replace the power button in an intel iMac.
-
-
To get to the power button first remove the hard drive fan as seen in other guides.
-
-
-
This is a picture of the button in place with the connector to the logic board removed.
-
There are three plastic pins protruding up from the main back case that the button fits over. They appear to be slightly melted and mashed to hold it in place. I used a pocket knife to pry it up and off the posts.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.