Introduction

This guide is fairly easy. It requires no tools and will only take about 5 minutes.

Lay the Roomba on a flat surface with the red side up.
  • Lay the Roomba on a flat surface with the red side up.

Ajouter un commentaire

Push in the red, gumdrop-shaped button with your thumb. While holding in the button, slide the back piece away from the main body of the Roomba.
  • Push in the red, gumdrop-shaped button with your thumb.

  • While holding in the button, slide the back piece away from the main body of the Roomba.

Ajouter un commentaire

Flip the back piece over in your hand. Using your other hand, grab the yellow tab and pull it away from the back piece. Using your other hand, grab the yellow tab and pull it away from the back piece.
  • Flip the back piece over in your hand.

  • Using your other hand, grab the yellow tab and pull it away from the back piece.

Ajouter un commentaire

Pinch the black plastic of the filter and pull it away from the yellow filter holder. Pinch the black plastic of the filter and pull it away from the yellow filter holder. Pinch the black plastic of the filter and pull it away from the yellow filter holder.
  • Pinch the black plastic of the filter and pull it away from the yellow filter holder.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

Membre depuis le 13/01/2014

501 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-5, Forte Winter 2014 Membre de l'équipe Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 387